Anycubic3D Printer Resin,405Nm Sla Uv-Curing Resin With High Precision And Quick

Description

ANYCUBIC3D Printer Resin,405nm SLA UV-Curing Resin with High Precision and Quick
Product Description
For LCD
Specifically designed for LCD light source to achieve better printing quality.
High Precision
Low shrinkage,dimensional stability when printing.The model has high precision and clear details.
Quick Curing
ANYCUBIC UV resins can be rapid prototyping. It has been developed to reduce the forming time.
Rigid & Toughness
Appropriate toughness.ANYCUBIC UV resins have good combination of hardness and toughness,which brings easy removal of model and fine printing details
P
arameter information:
Main material: resin monomer & photo initiator
Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s
Precautions:
Storage method:
Keep away from light seals at room temperature. (Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).
It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.
Usage:
Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely attention.
Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).
Specifically designed for led light source to achieve better printing quality
Rapid prototyping. The resin has been developed to reduce the forming time
Strong adhesion. The adhesion has been improved for higher print success rate
Appropriate toughness. Anycubic uv resins have good combination of hardness and toughness, which brings easy removal of the POT016 and fine printing details
Great stability. After cured, Anycubic uv resins show good stability in moist and corrosive environment