Beliveer PLA PETG PLA+ Silk 3D Printer Filament 1.75mm 1KG Accuracy +/-0.02mm

Description

PLA Filament
1. Environmental protection, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and strong rigidity;
Suitable for all types of FDM3D printers, suitable for printing handicrafts, artwork and industrial design samples, etc.
Parameter
Wire diameter: 1.75 mm
Tolerance: ±0.02MM
Printing temperature: 200-230℃
Bottom plate temperature: Glue water is required when not heated. Glue water is not required to heat 60-80℃
Rally (KGF): 11-16
Melt index: 7-9g/10min (190℃, 2.16Kg)
Elongation at break: 4%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1 KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM(1KG)=330M
PLA Carbon Fiber Filament
1. Environmental protection and non-toxic;
2. High strength, high modulus fiber material;
3. The advantages of high rigidity, low density and light weight;
4. Good adhesion between layers;
Suitable for all types of FDM3D printers, suitable for printing thin, hollow models and model products with rigid texture requirements.
Parameter
Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 200-230℃
Bottom plate temperature: Glue water is required when not heated. Glue water is not required to heat 60-80℃
Rally (KGF): 11-14
Melt index: 11-16g/10min (220℃, 2.16kg)
Elongation at break: 3%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1KG
Gross weight: 1.3KG/roll
Length: 1.75MM(1KG)=300M
PETG  Filament
1. Environmental protection and non-toxic;
2. Bright color;
3. Low shrinkage;
4. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent toughness, weather resistance, and good adhesion.
5. Good dimensional stability, no cracks and warpage.
6. High transparency and good gloss.
Suitable for all types of FDM3D printers, suitable for printing commonly used models, handicrafts, industrial parts, advertising characters, etc.
Parameter
Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 220-250℃
Bottom plate temperature: Glue water is required when not heated. Glue water is not required to heat 60-80℃
Rally (KGF): 8-14
Melt index: 6-11g/10min (220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1KG/roll
Gross weight: 1.3KG/roll
Length: 1.75MM(1KG)=320M
WOOD Filament
1. Environmental protection, non-toxic, biodegradable;
2. Close to solid wood effect;
3. Low shrinkage
Suitable for all models of FDM3D printers, suitable for printing wood-effect models, such as portraits, small furniture decorations, etc.
Parameter
Wire diameter: 1.75mm
Tolerance: ±0.02MM
Printing temperature: 200-230℃
Bottom plate temperature: Glue water is required when not heated. Glue water is not required to heat 60-80℃
Rally (KGF): 8-13
Melt index: 8-13g/10min (190℃, 2.16kg)
Elongation at break: 4%
Printing speed: 30-60MM/s
Air bubbles: 100% zero bubbles
Net weight: 1KG/roll
Gross weight: 1.3KG/roll
Length: 1.75MM(1KG)=330M
Silk PLA+ Filament
Silk pla filament is degradable, non-toxic material, close to silk effect, toughness of higher than 50 times PLA.  Neat winding filament print smoothly, no tangle.  100% No bubble 3d printing filament.
Parameter
Tolerance: +/-0.02mm
Diamenter: 1.75mm
Printing speed: 30-60mm/s
Printing temperature: 200-230 degree
Weight: 1kg with spool
Length:1.75mm(1kg)=330m
Packing: Vacuum bag packing with box
SPLA Filament
1. Environmentally friendly and non-toxic, printing without odor;
2. High transparency and bright color;
3. Good aging resistance;
4. Good mechanical properties and high toughness;
5. The printed products are delicate and bright
Parameter
Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 210-230℃
Floor temperature:
1. Rough bottom plate/lattice plate heating above 80℃.
2. Heat the smooth mirror surface such as glass plate at 80℃ and apply glue
Tension (KGF): 6-9
Melt index: 3-6g/10min (190℃, 2.16kg)
Elongation at break: 12%
Print speed: 30-60MM/s
Bubbles: 100% zero bubbles
Net weight: 1KG/roll
Gross weight: 1.3KG/roll
Length: 1.75MM(1KG)=330M
PLA+ Filament
1. Environmental protection, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and high rigidity;
5. Good toughness and not easy to be brittle;
6. 10 times higher toughness than PLA on the market, printing is smooth, and the finished surface is smoother and more delicate;
Suitable for all types of FDM3D printers, suitable for printing handicrafts, artwork, industrial design samples, and product models with higher toughness requirements.
Parameter
Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 210-235℃
Floor temperature: 70-80℃
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1 KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM(1KG)=330M
ABS Filament
1. Has excellent impact strength and wear resistance;
2. Chemical resistance, dyeing, molding processing, and mechanical processing effect is better;
3. The support is easy to peel off;
It is suitable for equipment with a heating device on the
bottom plate.
It can print models that require strong printing strength and require subsequent processing, such as dyeing, polishing, electroplating, etc., suitable for making small parts.
Parameter
Wire diameter: 1.75 mm
Tolerance: ±0.02MM
Printing temperature: 230-270℃
Floor temperature: 80-120℃
Rally (KGF): 6-11
Melt index: 12-19g/10min (220℃, 10kg)
Elongation at break: 25%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1 KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM(1KG)=395M